Soll cutting tools
Continuous: smooth cut, pre-turned surface.
Lightly interrupted: cuts of varying depths, cast or forged skins, lightly interrupted cuts.
Heavy Interruption: Heavy interrupted cutting.
Continuous: smooth cut, pre-turned surface.
Lightly interrupted: cuts of varying depths, cast or forged skins, lightly interrupted cuts.
Heavy Interruption: Heavy interrupted cutting.
Continuous: smooth cut, pre-turned surface.
Lightly interrupted: cuts of varying depths, cast or forged skins, lightly interrupted cuts.
Heavy Interruption: Heavy interrupted cutting.
Solution
Soll high quality cutting tools
01 R&D
→
As a manufacturer, our team provides solutions for customer-specific knives in addition to 500+ European and American replacements.
02 Powder
→
The blade is made of some hard materials, a typical blade usually contains 90% tungsten carbide, and then some metal component is added to tightly bond the tungsten carbide particles together. The commonly used metal is cobalt, and these raw materials come from our carefully screened supplier.
03 Precision molding
→
Depending on the type of blade, the pressure required to press the blade can be up to 25 tons at high pressures. The binder added to the mixture can make the pressed molding powder aggregate together. The process is automated, and each blade is It is weighed and checked by the operator as required.
04 Sintering
→
The pressed insert is very fragile and needs to be hardened in a sintering furnace. This process takes 12-24 hours at a temperature of about 1500°C, after which the insert becomes an extremely hard sintered carbide product.
News Center
Sol Stainless Steel Turning Recommendations
2022-11-21 16:32
Three Difficulties in Stainless Steel Processing 1. Work hardening: stainless steel will harden during cutting, and the work hardening phenomenon caused by the previous feed or previous process will seriously affect the smooth progress of subsequent cutting.
MORE+How to identify the hardness and wear resistance of cutting tools
2022-08-22 15:53
Introduction to Cutting Technology
2022-08-22 15:54
Names and uses of turning tools
2022-08-22 15:55
How to select the insert of thread milling cutter
2022-08-22 15:56